QUBE – Hamilton, Australia

Qube Case Study

Qube, in Hamilton Australia, is a diversified logistics and infrastructure company with operating divisions providing logistics services for clients in both import and export cargo supply chains. Read the Qube case study to find out how ZoneSafe increased the safety of personnel on-site.

QUBE Hamilton had been looking for a system that would increase the visibility of personnel to operators of heavy machinery within their Port and meet various objectives. They carried out a six-month evaluation of the ZoneSafe system in which they identified and achieved the following objectives:

• To increase the visibility of personnel to operators of heavy machinery
• Reduce the risk of accidents occurring around the machine interface by alerting the operator of human presence
• To work towards fulfilling the Zero Harm strategy of QUBE by reducing the likelihood of accidents.

Overview

QUBE installed the ZoneSafe system onto three forklifts at QUBE Hamilton Port Operations in Brisbane, Australia. A trial zone was designated within the Hamilton site and any personnel working within this zone were required to wear ZoneSafe tags at all times. During the six-month trial period at QUBE Hamilton, the operation of the ZoneSafe system was monitored to enable its effectiveness to be assessed.

Calculations revealed that the Hamilton trial exceeded their expectations and also exceeded monitored KPI Values. The ZoneSafe system was found to perform well. It had a high level of acceptance by users, and this acceptance increased as time went by and users understood the benefits.

System Evaluation

The evaluation found that the ZoneSafe system fitted in well as another safety tool and complimented their existing suite of safety procedures. No evidence was found that ZoneSafe led to complacency by users and responsibility still remained with the individual. It was stated that the risk of complacency exists with or without ZoneSafe.

As part of the Hamilton evaluation, the robustness of the ZoneSafe tags was also tested in order to estimate the level of abuse they could withstand. A heavy forklift truck deliberately ran over the transponder a number of times whilst it was active until it failed after the fourth pass. QUBE were more than satisfied with the level of robustness of the tag.

System Training

Training on the operation of the ZoneSafe system was given to the machinery operators, ground personnel, new site inductees and visitors. Training covered the purpose and safe work instructions for using ZoneSafe. Machine operators were advised that when the ZoneSafe alarm sounds they are to stop as quickly as possible (with due consideration given to the stability of the machine and load).

Conclusion

In the Qube case study, users believed that the system was really important and would like to see the system rolled out onto all vehicles operating within the port. With appropriate training and education compliance was very high as users could see the safety benefits that the system offered. QUBE concluded that they would like to see the ZoneSafe system extended not only to reach stackers but also to shed and vessel hold operations throughout their 28 Ports.