Close menu
Lift Trucks and blind spots: how to avoid pedestrian injuries

Lift Trucks and blind spots: how to avoid pedestrian injuries

Lift trucks are widely used across a range of industries, but the potential for serious accidents is high, particularly for people working nearby. The combination of heavyweight, around three times the weight of an average car, rear wheel drive control, and front loads that obstruct the driver’s view make accidents commonplace, often with devastating results.

Common lift truck incidents include collisions with people or other vehicles, unstable loads falling from the truck, people being trapped, and the lift truck tipping over. Drivers have a lot to consider when operating the vehicle, often navigating confined spaces with multiple hazards and a heavy load, challenging even the most experienced driver. Many accidents occur due to blind spots where the driver has a limited view of the area and activity around the vehicle.

Blind spots are a common problem often arising when there is a load or attachment blocking the view, or simply relating to the nature of the working environment. Blind spots can occur at corners, doorways, intersections and crossings, or any area where there is an obstruction. In a busy worksite, blind spots greatly increase the risk of collision with hazards, vehicles and people and the greatest risk is to the people working in the area around the forklift. There are more than 1300 forklift accidents every year in the UK, averaging around five accidents every working day. By taking precautions around forklift use and addressing risk factors like blind spots, most accidents are avoidable.

 

Measures you can take to reduce accidents

1. Stay alert

When completing everyday or repetitive tasks, it’s easy to become complacent. This false sense of security, the assumption that everything will be okay, results in reduced situational awareness and is the root cause of many accidents at work. It’s crucially important to stay alert when operating a lift truck or when working nearby lift trucks and other vehicles.
The driver needs to take extra caution around blind spots and when carrying loads that obstruct the view. Pedestrians too, must remain aware of traffic and take extra care to stop and look before continuing to ensure the area is clear.

2. Slow down

forklift-safety-signs-for-doorways-blind-corners-and-aisles

It seems obvious, but it’s important to remember to watch your speed. Travelling at high speed dramatically increases the potential for a serious collision, and blind spots add an extra layer of hazard. Lift trucks are highly responsive, so high speeds greatly reduce the driver’s ability to control the vehicle and increase the chance of tipping over, which is the most common type of lift truck accident.

3. Use the horn and mirrors

Fitting a convex mirror to the lift truck and using wall mirrors at known blind spots in the working environment goes a long way to increasing visibility for drivers helping them to see around corners and loads.

Sounding the horn at corners and blind spots alerts other drivers and pedestrians in the area of an oncoming vehicle. People who regularly work around lift trucks can easily become complacent and let their guard down. Something as simple as sounding the horn alerts everyone in the area of the risk and can ultimately prevent a collision from taking place.

4. Make the most of signage

active-signage-in-marina-near-boat-stack

Safety signage is mandatory in high-risk areas, but sign blindness is a common problem – when workers are so used to seeing the same warning signs every day, they lose their effectiveness. There are ways to make signage much more engaging and effective.

ZoneSafe’s activated signage is triggered when a vehicle approaches a blind spot such as an intersection or blind corner, automatically activating illuminated flashing warning signs that really grab the attention. Activated signage is also very helpful in areas that are dimly lit where traditional signage just doesn’t stand out. Illumination draws the eye and automatically raises awareness, giving workers enough warning to stop and look for risk.

ZoneSafe projected warning signs offer a highly visual alert – the sign is automatically projected onto the floor when a vehicle approaches and is most effective at blind corners or around racking as it alerts people in the area that a vehicle they cannot yet see is approaching.

5. Install ZoneSafe Proximity Warning Alert System

The key to addressing blindspots is to increase visibility and alert everyone in the area to a concealed hazard.  The nature of blind spots means the hazard cannot be seen, but ZoneSafe makes the invisible visible.

ZoneSafe offers a flexible solution that fits lift trucks and most other MHE and heavy machinery. The system automatically delivers an audio/visual and often vibration alarm to alert wearers to the presence of danger.

By raising awareness and alerting drivers and pedestrians to the presence of the unseen risk, action can be taken and activity stopped before a collision takes place. ZoneSafe’s proximity warning and alert system is specifically designed to help reduce the risk of accidental collisions between materials handling equipment and pedestrians and other vehicles.

Don’t just take it from us! – Watch Robert Wilcox of Massey Wilcox discussing the benefits of ZoneSafe to his safe lift truck operation in our video case study Massey Wilcox Case Study

Lift Trucks and blind spots: how to avoid pedestrian injuries

For more details and to discuss your workplace safety concerns, contact ZoneSafe.

Back to industry news

Continue Reading

10 Types of Warehouse Safety Signage
10 Types of Warehouse Safety Signage

Safety signage is a legal requirement under the Health and Safety (Safety Signs and Signals) Regulations 1996 anywhere there is a significant safety risk. Numerous types of…

Read more

ZoneSafe Exhibiting at Recycling Expo 2024
ZoneSafe Exhibiting at Recycling Expo 2024

We are excited to add a new exhibition to our 2024 schedule! Recycling Expo 2024 will be held at ExCeL London from 15-16 October. This…

Read more

Visit ZoneSafe at SHW Live South – Farnborough
Visit ZoneSafe at SHW Live South – Farnborough

Our next exhibition this year see’s ZoneSafe exhibiting in Farnborough at SHW Live – South. Come and see a live ZoneSafe demo! 📍 Find us…

Read more

Get in Touch

See how ZoneSafe can provide a solution for you   Get in touch